toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Steering Wheel|Service and Repair > < Collision / Non-Collision Inspections|Page 6159
Page 1
background image

Steering Wheel: Testing and Inspection
Steering Effort and Steering Wheel Freeplay

INSPECTION 

1. CHECK STEERING WHEEL FREEPLAY

a. Stop the vehicle and face the tires straight ahead.
b. Rock the steering wheel gently up and down with a finger lightly, check the steering wheel freeplay.

Maximum freeplay: 30 mm (1.18 inch) 

2. CHECK STEERING EFFORT

a. Center the steering wheel.
b. Remove the steering wheel pad.
c. Start the engine and run it at idle.
d. Measure the steering effort in both directions.

Steering effort (Reference): 4.9 Nm (50 kgf-cm, 43 inch lbs.) 

HINT:  Take the tire type, pressure and contact surface into consideration before making your diagnosis.

e. Install the steering wheel set nut.

Torque: 34 Nm (350 kgf-cm, 25 ft. lbs.) 

f.

Install the steering wheel pad.

Steering Wheel|Service and Repair > < Collision / Non-Collision Inspections|Page 6159