Corolla LE Sedan L4-1.8L (1ZZ-FE) (1999)
Suspension Strut / Shock Absorber: Technical Service Bulletins
Front Suspension - Addition of Plate Washers
SUSPENSION
SU004-00
December 1, 2000
Title:
FRONT SUSPENSION PLATE WASHER
Models:
'98 - '01 Corolla
Introduction
A procedure has been developed for removal and installation of the front shock absorber on 1998 - 2001 model year Corolla vehicles due to the addition
of plate washers between the front suspension support and support nuts.
Applicable Vehicles
^
1998 - 2001 model year Corolla vehicles.
Production Change Information
Parts Information
Warranty Information
Repair Procedure
Removal
1.
Remove the front wheel.
2.
With ABS: Disconnect the ABS speed sensor wire harness clamp.
3.
Remove the bolt and disconnect the flexible hose from the shock absorber.
4.
Remove the shock absorber with coil spring.