toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Brake Caliper > < Bleeding the Brake System|Page 4486
Page 3
background image

CAUTION:  Do not finish bleeding the ABS actuator with the operation still abnormal.

i.

Turn the ignition switch OFF. 

j.

Repeat step 3- b.to e.

k. Repeat step 4- b. to j. several times. 

HINT:  Repeat the above procedure to bleed the air cut of the brake line for each wheel.

l.

Disconnect terminals Tc, Ts and E1 of DLC1

5. Check fluid level in reservoir.

Check the fluid level and add fluid if necessary.
Fluid: SAEJ1703 or FMVSS No.116 DOT 3 

Brake Caliper > < Bleeding the Brake System|Page 4486