Corolla LE Sedan L4-1762cc 1.8L DOHC MFI (1998)
a. Remove the union bolt and 2 gaskets from the caliper, then disconnect the flexible hose from the caliper.
Torque: 30 Nm (22 ft.lb)
HINT: At the time of installation, please refer to the following item.
-
Install the flexible hose lock securely in the lock hole in the caliper.
b. Use a container to catch the brake fluid as it drains out.
2. Remove caliper.
a. Remove the 2 installation bolts.
Torque: 34 Nm (25 ft.lb)
b. Remove the caliper from the torque plate.
3. Remove these parts:
2 brake pads with 4 anti-squeal shims
2 pad support plates
INSTALLATION
-
Installation is in the reverse order of removal.
-
After installation, fill brake reservoir with brake fluid, bleed brake system and check for leaks.