Corolla LE Sedan L4-1762cc 1.8L DOHC MFI (1998)
3. Disconnect brake lines.
Using Special Service Tool (SST) 09023-00100 or equivalent, disconnect the brake lines from the master cylinder.
Torque: 15 Nm (11 ft.lb)
4. Remove master cylinder.
Remove the 3 mounting nuts and pull out the master cylinder, check valve bracket, 3-way and gasket.
INSTALLATION
Installation is in the reverse order of removal.
1. Before installation, adjust length of brake booster push rod.
2. After installation, fill brake reservoir with brake fluid, bleed brake system, check for leaks.
3. Check and adjust brake pedal.
Disassembly and Reassembly