Corolla LE Sedan L4-1762cc 1.8L DOHC MFI (1998)
2. Assemble Special Service Tool (SST) 09230-01010 or equivalent.
a. Install the claw to the overhaul handle, inserting it in the hole in part "A" as shown in the diagram.
b. While gripping the handle, adjust the stopper bolts so that dimension "B" shown in the diagram is 0.2 - 0.3 mm (0.008 - 0.012 inch).
NOTICE: If this adjustment is not done the claw may be damaged.
3. Uncaulk lock plates.
-
Using SST 09230-01010 to release the caulking, squeeze the handle until stopped by the stopper bolts.
4. Remove tanks and O-rings.
Lightly tap the bracket of the radiator (or radiator inlet or outlet) with a soft-faced hammer, and remove the tank and the O-ring.
5. With A/T: Remove oil cooler from lower tank.
a. Remove the 2 nuts and 2 plate washers.
b. Remove the oil cooler and 2 O-rings.
INSPECTION
