Corolla LE Sedan L4-1762cc 1.8L DOHC MFI (1998)
-
Inspect lock plate for damage.
HINT: If the sides of the lock plate groove are deformed, reassembly of the tank will be impossible. Therefore, first correct any deformation with
pliers or similar object. Water leakage will result if the bottom of the lock plate groove is damaged.
NOTICE: The radiator can only be recaulked 2 times. After the 2nd time, the radiator core must be replaced.
REASSEMBLY
1. With A/T: Install oil cooler to lower tank.
a. Install 2 new O-rings to the oil cooler.
b. Install the oil cooler to the lower tank.
c. Install the 2 plate washers and 2 nuts.
Torque: 8.34 Nm (74 inch lbs)
2. Install new O-Rings and tanks.
a. After checking that there are no foreign objects in the lock plate groove, install the new O-ring without twisting it.
HINT: When cleaning the lock plate groove, lightly rub it with sand paper without scratching it.
b. Install the tank without damaging the O-ring.
c. Tap the lock prate with a soft-faced hammer so that there is no gap between it and the tank.
3. Assemble SST 09230-01010, 09231-14010
