Corolla LE Sedan L4-1762cc 1.8L DOHC MFI (1998)
a. Align the camshaft knock pin with the knock pin groove on the sprocket side with timing mark, and slide on the timing sprocket.
b. Temporarily install the timing sprocket bolt.
c. Hold the hexagon wrench head portion of the camshaft with a wrench, and tighten the timing sprocket bolt.
Torque: 45 Nm (33 ft.lb)
2. Set No.1 cylinder to TDC on the compression stroke.
a. Turn the hexagonal wrench head portion of the camshafts, and align the point marks of the camshaft timing sprockets.
b. Using a crankshaft pulley bolt, Turn the crankshaft and set the set key on the crankshaft upward.
3. Install chain vibration damper.
