Corolla LE Sedan L4-1762cc 1.8L DOHC MFI (1998)
Fuel Pressure Release: Service and Repair
FUEL PRESSURE RELEASE PROCEDURE
A. When disconnecting the high fuel pressure line, a large amount of gasoline will spill out, so observe these procedures.
(1) Disconnect the fuel pump connector.
(2) Start the engine. After the engine has stopped on its own, turn the ignition switch to LOCK.
(3) Disconnect the fuel tube.
(4) Drain the fuel remained inside the fuel tube.
(5) Prevent the disconnected fuel tube from damaging and mixing foreign objects by covering them with a vinyl bag.
(6) Put a container under the connection.
