toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Headlamp Relay > < Headlamp Dimmer Switch|Testing and Inspection|Page 7086
Page 3
background image

Disconnect the connector from the sensor and inspect the connector on the wire harness side, as shown in the chart.
If circuit is as specified, perform the inspection.
if the circuit is not as specified, inspect the circuit connected to other parts.

Connector connected

INSPECT AUTOMATIC LIGHT CONTROL SENSOR CIRCUIT

Connect the wire harness side connector to the sensor
and inspect wire harness side connector from the back side.

HINT:

^

Ignition switch ON.

^

Light control switch OFF.

^

Vehicle's surroundings are bright.

If circuit is as specified, try replacing the sensor with a new one.
If the circuit is not as specified, inspect the circuit connected to other parts.

Headlamp Relay > < Headlamp Dimmer Switch|Testing and Inspection|Page 7086