Corolla LE Sedan L4-1762cc 1.8L DOHC MFI (1998)
Ignition Cable: Testing and Inspection
INSPECT HIGH-TENSION CORDS
(a) Disconnect the high-tension cords from the spark plugs.
NOTICE: Pulling on or bending the cords may damage the conductor inside.
(b) Disconnect the high-tension cords from the ignition coils.
(1) Using a screwdriver, lift up the lock claw and disconnect the holder from the ignition coils.
(2) Disconnect the high-tension cord at the grommet.
NOTICE:
-
Pulling on or bending the cords may damage the conductor inside.
-
Do not wipe any of the oil from the grommet after the high-tension cord is disconnected.
(c) Using an ohmmeter, measure the resistance.
Maximum resistance: 25 K ohms per cord
If the resistance is greater than maximum, check the terminals. If necessary, replace the high-tension cord.