toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Diagram Information and Instructions|Page 24 > < Diagram Information and Instructions|Page 22
Page 1
background image

Alarm Horn Relay: Testing and Inspection

Horn Relay Circuit

CIRCUIT DESCRIPTION 

When the theft deterrent system is activated, it causes the Tr in the ECU to switch on and off in approximately 0.4 sec. cycles. This switches the 
horn relay on and off, thus the horns blow (See the wiring diagram below). In this condition, if any of the following operations is done, the Tr in
the ECU goes off and the horn relay switches off, thus stopping the horns from blowing:
(1) Unlock the front LH or RH door with key.
(2) Turn the ignition switch to ACC or ON position.
(3) Unlock the doors with the wireless door lock control system.
(4) Wait for approximately 60 seconds.

WIRING DIAGRAM 

Step 1

Diagram Information and Instructions|Page 24 > < Diagram Information and Instructions|Page 22