toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Impact Sensor|Specifications|Page 5574 > < Impact Sensor|Specifications|Page 5572
Page 1
background image

Impact Sensor: Testing and Inspection

1. VEHICLES NOT INVOLVED IN A COLLISION 

Do a diagnostic system check.

2. VEHICLES INVOLVED IN A COLLISION

a. Do a diagnostic system check.
b. If the front fender of the car or its periphery is damaged, do a visual check for damage to the front airbag sensor, which includes the following

items even if the airbag was not deployed:
^

Bracket deformation

^

Peeling of paint off the bracket

^

Cracks, dents or chips in the case

^

Cracks and dents in, or chipping and scratches of the connector

^

Peeling of the label or damage to the serial number

REPLACEMENT REQUIREMENT

In the following cases, replace the front airbag sensor.

^

If the SRS has been deployed in a collision. (Replace both the left and right airbag sensors.)

^

If the front airbag sensor has been found to be faulty in troubleshooting.

^

If the front airbag sensor has been found to be faulty during the check in item 2-(b).

^

If the front airbag sensor has been dropped.

Impact Sensor|Specifications|Page 5574 > < Impact Sensor|Specifications|Page 5572