Corolla LE Sedan L4-1762cc 1.8L DOHC MFI (1998)
1. INSTALL FRONT AIRBAG SENSOR
Install the sensors according to the arrows showing the up side of the vehicle.
Torque: 20 N.m (200 kgf.cm, 14 ft.lbf)
NOTICE:
^
Make sure the sensor is installed to the specified torque.
^
If the sensor has been dropped, or there are cracks, dents or other defects in the case, brackets or connector, replace the removed sensor.
Always replace the set bolts and nuts with new ones.
^
The sensor set bolts and nuts have been anti-rust treated. When the sensor is removed, always replace the set bolts and nuts with new ones.
^
After installation, shake the sensor to check that there is no looseness.
^
The front sensor is equipped with an electrical connection check mechanism. Be sure to lock this mechanism securely when connecting the
connector. If the connector is not securely locked, a malfunction code will be detected by the diagnostic system.
2. INSTALL REMOVED PARTS
