Corolla LE Sedan L4-1762cc 1.8L DOHC MFI (1998)
However, if the seat belt is put ON during this period (while the buzzer is sounding and warning light blinking), signal input to TERMINAL (A)
5 of the relay stops, and the current flow from TERMINAL (A) 3 of the relay to TERMINAL 7 to GROUND is cut, stopping the buzzer and
warning light blinking.
2. KEY REMINDER SYSTEM
With the ignition key inserted in the key cylinder (Unlock warning SW ON), the ignition SW still OFF and the driver's door open (Door courtesy
SW ON), when a signal is input to TERMINALS (A) 4 and 8 of the relay, the integration relay operates, the current flows from TERMINAL (A)
3 of the relay to TERMINAL 7 to GROUND and the key reminder buzzer goes ON.
Connector Joining Wire Harness and Wire Harness
Connector Joining Wire Harness and Wire Harness
Locations Of Connector Joining Wire Harness And Wire Harness (Fig 42)
Ground Points
Ground Points