toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Starter Motor|Removal and Installation|Page 4793 > < Starter Motor|Removal and Installation|Page 4791
Page 3
background image

5. REMOVE STARTER

a. Disconnect the starter connector.
b. Remove the nut, and disconnect the starter wire.
c. Remove the 2 bolts and starter.

INSTALLATION

1. INSTALL STARTER

a. Install the 2 bolts and starter.
b. Connect the starter wire, and install the nut.
c. Connect the starter connector.

2. INSTALL WIRE CLAMP

3. INSTALL RH ENGINE UNDER COVER

4. INSTALL RADIATOR RESERVOIR

5. INSTALL BATTERY AND TRAY

HINT:  Each bolt length is indicated in the illustration.
Bolt length
64 mm (2.72 in.)
54 mm (2.13 in.)

Starter Motor|Removal and Installation|Page 4793 > < Starter Motor|Removal and Installation|Page 4791