Corolla LE Sedan L4-1762cc 1.8L DOHC MFI (1998)
HINT:
-
Try to adjust the toe-in to the center value.
-
Make sure that the length of the left and right rack ends is the same.
Rack end length difference: 1.0 mm (0.039 inch) or less
d. Torque the tie rod end lock nuts.
Torque: 56 Nm (41 ft. lbs.)
e. Place the boot on the seat and install the clamp.
HINT: Make sure that the boots are not twisted.
7. Inspect wheel angle.
Turn the steering wheel fully, and measure the turning angle.
If the wheel angles differ from the standard specifications, adjust the toe-in.
