toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Steering Wheel Nut - Torque Standardization|Page 5198 > < Steering Wheel Nut - Torque Standardization|Page 5196
Page 1
background image

Steering Wheel: Testing and Inspection

INSPECTION  
 

1. Check steering wheel freeplay. 

With the vehicle stopped and tires facing straight ahead, rock the steering wheel gently back and forth with light finger pressure. 
Freeplay should not exceed the maximum.
Maximum freeplay: 30 mm (1.18 in.) 

2. Check steering effort.

a. Center the steering wheel.
b. Remove the steering wheel pad.
c. Start the engine and run it at idle.
d. Measure the steering effort in both directions.

Reference: 4.9 Nm (43 inch lbs.) 

HINT:  Take the tire type, pressure and contact surface into consideration before making your diagnosis.

e. Torque the steering wheel set nut.

Torque: 34 Nm (25 ft. lbs.)  

f.

Install the steering wheel pad.

Steering Wheel Nut - Torque Standardization|Page 5198 > < Steering Wheel Nut - Torque Standardization|Page 5196