Corolla LE Sedan L4-1762cc 1.8L DOHC MFI (1998)
8. Remove dust cover.
Using Special Service Tool (SST) 09950-00020 or equivalent, and a press, remove the dust cover from the inboard joint tulip.
9. Remove No.2 dust deflector.
a. Mount the outboard joint shaft in a soft jaw vise.
b. Using a screwdriver and hammer, remove the No.2 dust deflector.
NOTICE: Be careful not to damage the ABS speed sensor rotor.
REASSEMBLY
1. Install new No.2 dust deflector.
Using SST 09309-36010, 09316-20011 and a press, install a new No.2 dust deflector.
NOTICE: Be careful not to damage the ABS speed sensor rotor.
2. Install new dust cover.
Using a press, install the inboard joint tulip into a new dust cover.
