toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 1363 > < Initial Inspection and Diagnostic Overview
Page 2
background image

3. INSPECT COOLING FANS 

a. Disconnect the cooling fan connector.
b. Connect battery and ammeter to the connector.
c. Check that the cooling fan rotates smoothly, and check the reading on the ammeter.

Standard amperage: 5.2 - 8.2 A 

d. Reconnect the cooling fan connector. 

Initial Inspection and Diagnostic Overview|Page 1363 > < Initial Inspection and Diagnostic Overview