Corolla S Sedan L4-1.8L (1ZZ-FE) (2002)
/Page-388003.png)
c. Inspect the No. 3 cooling fan relay continuity.
1) Using an ohmmeter, check that there is continuity between terminals 1 and 2.
If there is no continuity, replace the relay.
2) Check that there is no continuity between terminals 3 and 5.
If there is continuity, replace the relay.
d. Inspect the No. 3 cooling fan relay operation.
1) Apply battery positive voltage across terminals 1 and 2.
2) Using an ohmmeter, check that there is continuity between terminals 3 and 5.
If there is no continuity, replace the relay.
e. Reinstall the No. 3 cooling fan relay.
f.
Reinstall the relay box cover.
No. 2 & 3 Cooling Fan Relay
INSPECTION
1. REMOVE COOLING FAN RELAY NO.2 (Marking: AC FAN NO.2) FROM RELAY BLOCK NO.5
