Corolla S Sedan L4-1.8L (1ZZ-FE) (2002)
/Page-346016.png)
16. INSTALL RH ENGINE MOUNTING INSULATOR
a. Install the RH engine mounting insulator with the 4 bolts and 2 nuts.
Torque:
63.7 Nm (650 kgf-cm, 47 ft. lbs.) for bolt A
25.5 Nm (260 kgf-cm, 19 ft. lbs.) for bolt B
52.0 Nm (530 kgf-cm, 38 ft. lbs.) for nut
b. w/ A/C:
Install the bolt holding the A/C piping clamp to the RH engine mounting insulator.
17. INSTALL PS PUMP
a. Install the PS pump with the 2 through bolts and nuts.
Torque: 37 Nm (370 kgf-cm, 27 ft. lbs.)
b. Install the PS pump pulley with the pulley nut.
c. Using SST, torque the pulley nut.
SST 09960-10010 (09962-01000, 09963-01000)
Torque: 43 Nm (440 kgf-cm, 32 ft. lbs.)
d. Connect the PS oil pressure switch connector.
18. INSTALL GENERATOR AND DRIVE BELT
19. INSTALL RH ENGINE UNDER COVER
20. INSTALL RH FRONT WHEEL
21. INSTALL WASHER TANK
22. FILL WITH ENGINE COOLANT
23. START ENGINE AND CHECK FOR COOLANT LEAKS
