toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Condenser HVAC|Testing and Inspection|Page 3570 > < Condenser HVAC|Testing and Inspection
Page 1
background image

Condenser HVAC: Service and Repair

REMOVAL

1. DISCHARGE REFRIGERANT FROM REFRIGERATION SYSTEM
2. REMOVE RECEIVER

3. DISCONNECT DISCHARGE HOSE

Remove the bolt and disconnect the hose.

NOTE:  Cap the open fittings immediately to keep moisture or dirt out of the system.

4. REMOVE 2 UPPER RADIATOR SUPPORTS
5. REMOVE NO.6 RELAY BLOCK SET BOLTS
6. DRAIN ENGINE COOLANT

HINT:  It is not necessary to drain out all the coolant.

7. DISCONNECT UPPER RADIATOR HOSE
8. DISCONNECT ENGINE COOLANT RESERVOIR HOSE
9. REMOVE CONDENSER

a. Lift up the radiator and push it toward engine.

Condenser HVAC|Testing and Inspection|Page 3570 > < Condenser HVAC|Testing and Inspection