Corolla S Sedan L4-1.8L (1ZZ-FE) (2002)
1. INSTALL COOLING UNIT
a. Install the cooling unit with the 3 screws and nut.
b. Connect the connectors.
2. INSTALL A/C AMPLIFIER
a. Install the amplifier with the 2 nuts.
b. Connect the connector.
3. INSTALL LOWER FINISH PANEL
4. INSTALL TUBE GROMMET AND DRAIN HOSE GROMMET
5. CONNECT LIQUID AND SUCTION TUBES
a. Lubricate 4 new O-rings with compressor oil and install them to the tubes.
b. Connect the connector.
c. After connection, check the fitting for claw of the piping clamp.