Corolla S Sedan L4-1.8L (1ZZ-FE) (2002)
Airbag Sensor Assembly
REMOVAL
NOTE: Do not open the cover or the case of the ECU and various computers unless absolutely necessary. (If the IC terminals are touched, the IC may
be destroyed by static electricity.)
1. REMOVE FRONT DOOR SCUFF PLATE LH AND RH
2. REMOVE COWL SIDE TRIM LH AND RH
3. REMOVE LOWER FINISH PANEL
4. REMOVE LOWER LH INSERT
5. REMOVE LOWER PANEL
6. REMOVE LOWER RH PANEL
7. REMOVE CENTER CLUSTER FINISH PANEL