Corolla S Sedan L4-1.8L (1ZZ-FE) (2002)
/Page-1054001.png)
Airbag Sensor Assembly: Testing and Inspection
Side Airbag Sensor Assembly
Collision / Non-Collision Inspections
INSPECTION
1. VEHICLES NOT INVOLVED IN COLLISION
Do a diagnostic system check. *
2. VEHICLE INVOLVED IN COLLISION AND AIRBAG IS NOT DEPLOYED
Do a diagnostic system check. *
3. VEHICLE INVOLVED IN COLLISION AND AIRBAG IS DEPLOYED
Replace the side airbag sensor assembly.
* Refer to SRS Warning Light Check, and How to Display and Read Diagnostic Trouble Codes.
See: Air Bag Systems/Testing and Inspection/Reading and Clearing Diagnostic Trouble Codes/Displaying & Reading Trouble Codes
Replacement Requirements
REPLACEMENT REQUIREMENTS
In the following cases, replace the side airbag sensor assembly.
-
If the side airbag sensor assembly has been deployed in a collision.
-
If the side airbag sensor assembly has been found to be faulty in troubleshooting.
-
If the side airbag sensor assembly has been dropped.
CAUTION: Be sure to follow the correct procedure, for removal and installation of the side airbag sensor assembly.
