Corolla S Sedan L4-1.8L (1ZZ-FE) (2002)
1. LH:
REMOVE FRONT AIRBAG SENSOR
a. Remove the LH engine under cover.
b. Disconnect the connector.
c. Remove the 2 bolts and front airbag sensor.
2. RH:
REMOVE FRONT AIRBAG SENSOR
a. Remove the RH front turn signal light.
b. Remove the RH headlight.
c. Disconnect the connector.
d. Remove the bolt, 2 nuts and front airbag sensor.
INSTALLATION
1. INSTALL FRONT AIRBAG SENSOR
a. Install the front airbag sensor with the arrow on the sensor facing toward the front of the vehicle.