Corolla S Sedan L4-1.8L (1ZZ-FE) (2002)
Alternator: Service and Repair
Disassembly and Reassembly
DISASSEMBLY
1. REMOVE REAR END COVER
a. Remove the nut and terminal insulator.
b. Remove the bolt, 3 nuts, plate terminal, end cover and brush holder cover.
2. REMOVE BRUSH HOLDER AND VOLTAGE REGULATOR
a. Remove the 5 screws, brush holder and voltage regulator.
b. Remove the seal plate from the rectifier end frame.
3. REMOVE RECTIFIER HOLDER
a. Remove the 4 screws and rectifier holder.
b. Remove the 4 rubber insulators.
4. REMOVE PULLEY