Corolla S Sedan L4-1.8L (1ZZ-FE) (2002)
/Page-915006.png)
b. Install the coil spring to the shock absorber.
HINT: Fit the lower end of the coil spring into the gap of the lower insulator.
4. INSTALL SUSPENSION SUPPORT
a. Align the suspension support with the shock absorber lower bracket, as shown in the illustration.
b. Install the collar to the piston rod.
c. Temporarily install a new nut.
d. Remove the SST.
SST 09727-30021
HINT: After removing SST, recheck the direction of the suspension support.
