Corolla S Sedan L4-1.8L (1ZZ-FE) (2002)
Wheel Fastener: Service and Repair
Front
REPLACEMENT
1. REMOVE FRONT WHEEL
2. REMOVE BRAKE CALIPER AND DISC
a. Remove the 2 bolts, brake caliper and disc.
b. Support the brake caliper securely.
3. REMOVE HUB BOLT
Using SST and a hammer handle or an equivalent, remove the hub bolt.
SST 09628-10011
4. INSTALL HUB BOLT
a. Install a washer and nut to a new hub bolt as shown in the illustration.
b. Using a hammer handle or an equivalent to hold, install the hub bolt by torquing the nut.
5. INSTALL DISC AND BRAKE CALIPER
Install the disc and brake caliper with the 2 bolts.
Torque: 88 Nm (900 kgf-cm, 65 ft. lbs.)
6. INSTALL FRONT WHEEL
Torque: 103 Nm (1,050 kgf-cm, 76 ft. lbs.)