Corolla S Sedan L4-1794cc 1.8L DOHC MFI (2001)
b. Using a torx wrench install the side airbag assembly with 4 screws.
Torx wrench: T40 (Part No.09042-00020 or locally manufactured tool)
Torque: 20 N.m (205 kg.cm, 15 ft.lb)
2. INSTALL FRONT SEAT OUTER BELT RETRACTOR.
a. Install the retractor with 2 bolts.
Torque:
-
Upper bolt: 4.9 N.m (50 kg.cm, 43 in.lb)
-
Lower bolt: 41 N.m (420 kg.cm, 30 ft.lb)
b. LH side only:
Connect the retractor switch connector.
c. Connect the pretensioner connector.
3. INSTALL CENTER PILLAR LOWER GARNISH
4. INSTALL FRONT DOOR SCUFF PLATE
