toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Throttle Valve Cable/Linkage, A/T|Service and Repair|Page 1560 > < A/T - Front Pump and Stator Shaft|Page 1556
Page 1
background image

Throttle Valve Cable/Linkage: Service and Repair

REMOVAL OF THROTTLE CABLE

1. DISCONNECT THROTTLE CABLE FROM ENGINE

Disconnect the cable from the throttle linkage.

2. REMOVE NEUTRAL START SWITCH

a. Disconnect the transmission control cable from the manual shift lever.
b. Remove the manual shift lever.
c. Remove the neutral start switch.

3. REMOVE VALVE BODY 

4. PULL THROTTLE CABLE OUT OF TRANSMISSION CASE

a. Remove the bolt and retaining plate.
b. Pull the cable out of the transmission case.

INSTALLATION OF THROTTLE CABLE

Throttle Valve Cable/Linkage, A/T|Service and Repair|Page 1560 > < A/T - Front Pump and Stator Shaft|Page 1556