Corolla Sedan L4-96.8 1587cc 1.6L DOHC (4A-FE) (1989)
5.
If the rotor runout is still out of the specified limit (0.0020 in. or 0.05 m), replace the axle hub with the new (Part No. 43502-12080).
6.
After reconfirming that the runout is within spec's (0.0020 in.), install the caliper, pad kit (04491-12431) and wheels. Torque the lug nuts using a
cross pattern as shown in in FIG. 2 to 35 ft.lb. (47 N-m). Then retorque to 1050 kg-cm (76 ft.lb. or 103 N-m).
Caution:
DO NOT use an air impact wrench to tighten wheel lug nuts.
PART NUMBER INFORMATION:
New P/N
Previous P/N
Part Discrintion
# 04491-12431
-
-
-
New Pad
Kit, Front Brakes
43512-12320
43512-12250
Disc, Front
*
43502-12080 43502-20080 Hub Sub-Assy, Front Axle
# This pad kit should only be used on vehicles with the complaint of brake vibration. on all other brake repairs, use the previous part number
04491-12401.
*
Replace only if the rotor runout exceeds (0.0020 in.) after installing the new rotor onto the original hub.
INTERCHANGEABILITY:
All parts are interchangeable with previous parts.
MODEL APPLICATION:
AE92-
From 1988 to 1990.