Corolla Sedan 4-Door L4-107.5 1762cc 1.8L DOHC (7A-FE) (1995)
/Page-942004.png)
2. Remove axle hub.
(a) Using SST, remove the axle hub from the bearing. SST 09950-40010
(b) Using a screwdriver. remove the oil seal from the inner race.
(c) Using SST, remove the inner race (outside) from the axle hub. SST 09950-40010
3. Install axle hub to bearing.
(a) Using SST and a press, install the axle hub to a new bearing.
(b) Install a new lock nut. SST 09608-30012 (09608-04030)
Torque: 123 N.m (1.250 kgf.cm. 90 ft.lbs)
(c) Stake the lock nut.
