Corolla Sedan 4-Door L4-1587cc 1.6L DOHC MFI (1997)
Brake Pad: Service and Repair
Front Brake Components
REPLACEMENT
1. Remove front wheel.
Remove the wheel and temporarily fasten the Disc with Hub nuts.
Inspecting Pad Thickness Through Caliper Inspection Hole
2. Inspect pad lining thickness.
Check the pad thickness through the Caliper inspection hole and replace the pads if they are not within the specification.
Minimum thickness: 1.0 mm (0.039 inch)
3. Remove Caliper from torque plate.
Removing 2 Installation Bolts
