Corolla Sedan 4-Door L4-1587cc 1.6L DOHC MFI (1997)
Brake Caliper: Service and Repair
Disassembly and Reassembly
Front Brake Components
DISASSEMBLY
1. Remove cylinder boot set ring and cylinder boot.
Using a screwdriver, remove the cylinder boot set ring and cylinder boot from the Caliper.
2. Remove piston from cylinder.
(a) Place a piece of cloth, or similar, between the piston and the Caliper.
(b) Use compressed air to remove the pistons from the cylinder.
WARNING: Do not place your fingers in front of the piston when using compressed air.
