Corolla Sedan 4-Door L4-1587cc 1.6L DOHC MFI (1997)
a. Stretch the belt tight and loosen the water pump pulley bolts.
b. Loosen the pivot bolt and adjusting lock bolt.
c. Loosen the adjusting bolt, and remove the drive belt.
6. Remove A/C compressor without disconnecting hoses as follows:
a. Loosen the idler pulley mounting bolt A.
b. Loosen the adjusting bolt B and remove the drive belt.
c. Disconnect the A/C compressor connector.
d. Remove the 4 compressor mounting bolts.
e. Move the compressor aside and suspend it.
7. Remove A/C compressor mounting bracket.
8. Remove PS pump drive belt as follows:
a. Loosen the pivot and lock bolt.
b. Swing PS pump toward the engine and remove the drive belt.
9. Disconnect connector from ground wire on RH fender apron
10. Remove RH engine mounting insulator as follows: