toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 6650 > < Air Bag(s) Arming and Disarming|Service and Repair
Page 1
background image

Light Control Rheostat: Initial Inspection and Diagnostic Overview

LIGHT CONTROL RHEOSTAT INSPECTION

1. Turn the rheostat knob OFF, and check that there is continuity between terminals 1 and 3. (Rheostat knob turned to counterclockwise)
2. Gradually turn the rheostat knob from the dark side to bright side, and check that the resistance decreases from 10 to 0 Ohm. (Rheostat knob

turned to clockwise)

If operation is not as specified, replace the rheostat

Initial Inspection and Diagnostic Overview|Page 6650 > < Air Bag(s) Arming and Disarming|Service and Repair