toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 6962 > < Headlamp Relay|Locations|Page 6959
Page 1
background image

Headlamp Relay: Initial Inspection and Diagnostic Overview

Headlight Control Relay

HEADLIGHT CONTROL RELAY INSPECTION

Inspect Relay Continuity

If continuity is not as specified, replace the relay.

Headlight Retainer Relay

HEADLIGHT RETAINER RELAY INSPECTION

1. Inspect Headlight Circuit Operation

a. Connect the positive (+) leads from the battery terminals 1 and 6. and the negative (-) lead to terminal 3.
b. Connect the 3.4 W test bulb between terminal 7 and the positive (+) lead from the battery.

c. Disconnect the positive (+) lead from terminal land check that the test bulb is lighting.
d. Connect the negative (-) lead to terminal 5, and check that the test bulb goes out.

If operation is not as specified, replace the relay.

Initial Inspection and Diagnostic Overview|Page 6962 > < Headlamp Relay|Locations|Page 6959