toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Emission Control Systems > < Diagram Information and Instructions|Page 3021
Page 1
background image

Vehicle Speed Sensor: Service and Repair

REPLACEMENT

1. Disconnect vehicle speed sensor connector.

2. Remove vehicle speed sensor assembly, as follows:

a. Remove the bolt and vehicle speed sensor assembly.
b. Remove the clip and speedometer driven gear from the vehicle speed sensor.
c. Remove the O-ring from the vehicle speed sensor.

3. Install vehicle speed sensor assembly, as follows:

a. Coat a new O-ring with Automatic Transmission Fluid (ATF) and install it to the vehicle speed sensor.

b. Install the speedometer driven gear to the vehicle speed sensor and clip.
c. Install the vehicle speed sensor assembly and torque the bolts.

Torque: 16 Nm (12 ft. lbs.).

4. Connect vehicle speed sensor connector.

Emission Control Systems > < Diagram Information and Instructions|Page 3021