Corolla Sedan 4-Door L4-1587cc 1.6L DOHC MFI (1997)
Distributor: Service and Repair
Removal and Installation
COMPONENTS FOR REMOVAL AND INSTALLATION
DISTRIBUTOR REMOVAL
1. DISCONNECT HIGH-TENSION CORDS FROM DISTRIBUTOR CAP
(a) Using a screwdriver. lift up the lock claw and disconnect the holder from the distributor cap.
(b) Disconnect the high-tension cord at the grommet. DO NOT pull on the cord.
NOTICE: Pulling on or bending the cords may damage the conductor inside.
2. DISCONNECT DISTRIBUTOR CONNECTOR
3. REMOVE DISTRIBUTOR
(a) Remove the mounting bolt, and pull out the distributor.
(b) Remove the O-ring from the distributor housing.