Corolla Sedan 4-Door L4-1587cc 1.6L DOHC MFI (1997)
b. Apply seal packing to the cylinder head as shown in the illustration.
c. Install the gasket to the cylinder head cover.
d. Install the cylinder head cover with the 4 seal washers and 4 cap nuts. Torque: 5.9 Nm (52 inch lbs.)
e. Connect the 2 PCV hoses to the cylinder head cover.
f.
Install the engine wire harness and protector with the 2 bolts.
g. Connect the following wires and clamps:
^
Generator connector
^
Generator wire
^
Oil pressure switch connector
^
2 wire clamps
6. Reconnect high-tension cords to spark plugs
