toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Wheel Speed Sensor|Front|Page 550 > < Wheel Speed Sensor|Diagrams|Front|Page 547
Page 1
background image

Wheel Speed Sensor: Service and Repair
Front

Front Speed Sensor Components

REMOVAL 

Disconnecting Speed Sensor Connector

1. Disconnect Speed Sensor connector.

(a) Remove the fender liner.
(b) Disconnect the Speed Sensor connector.

2. Remove Speed Sensor.

Removing Speed Sensor From Steering Knuckle

(a) Remove the 3 clamp bolts holding the sensor harness to the body and Shock Absorber. 

Torque: 5.5 Nm (49 inch lbs.)

(b) Remove the Speed Sensor from the Steering Knuckle. 

Torque: 8 Nm (71 inch lbs.)

INSTALLATION

Installation is in the reverse order of removal.

NOTE: After installation, check Speed Sensor signal.

Wheel Speed Sensor|Front|Page 550 > < Wheel Speed Sensor|Diagrams|Front|Page 547