Corolla Sedan 4-Door L4-1587cc 1.6L DOHC MFI (1997)
Key Interlock Solenoid: Testing and Inspection
1. Inspect key interlock solenoid, as follows:
a. Disconnect the solenoid connector.
b. Using an ohmmeter, measure the resistance between the terminals.
Standard resistance: 12.5-16.5 ohms
If resistance value is not as specified, replace the solenoid.
c. Apply battery positive voltage between the terminals. Check that the solenoid can be heard operating. If the solenoid does not operated,
replace the solenoid.
