Corolla Sedan 4-Door L4-1587cc 1.6L DOHC MFI (1997)
3. Install steering rack.
a. Install SST 09631 - 16020 to the rack.
NOTE: If necessary, scrape the burrs off the rack feet end and burnish.
b. Coat SST with power steering fluid.
c. Install the rack into the rack housing.
d. Remove the SST.
4. Install oil seal.
a. Coat a new oil seal lip with power steering fluid.
b. To prevent oil seal lip damage, wind vinyl tape on the steering rack end, and apply power steering fluid.
c. Install the oil seal by pushing it into the rack housing, without tilting.
CAUTION: Make sure to install the oil seal facing the correct direction.
5. Install cylinder end stopper.
a. Using SST 09612 - 22011 and a hammer, drive in the stopper.
b. Using snap ring pliers, install a new snap ring to the rack housing.
