toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Stabilizer Link|Front|Page 5079 > < Stabilizer Link|Front
Page 1
background image

Stabilizer Link: Service and Repair
Rear

REPLACEMENT

1. Remove rear wheels.

[torque:  103 Nm (76 ft. lbs.)].

2. Remove brake hose from shock absorber.

a. Remove the clip.
b. Using Special Service Tool (SST) 09023 - 00100, disconnect the brake line. Use a container to catch the brake fluid.

[torque:  15 Nm (11 ft. lbs.)].

3. Disconnect shock absorber from rear axle carrier.

a. Remove the clip from the shock absorber.
b. Remove the 2 nuts and bolts, and disconnect the shock absorber from the rear axle carrier.

[torque:  142 N m (105 ft. lbs.)].

Stabilizer Link|Front|Page 5079 > < Stabilizer Link|Front