toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Clutch, M/T > < Valve Body, A/T|Overhaul|Page 3828
Page 3
background image

INSTALLATION NOTICE:  Be careful not to entangle the kick-down switch and solenoid wire. 

c. Remove the valve body.

9. Remove 2nd brake apply gasket and governor oil strainer. 

INSTALLATION NOTE:  Replace the used gasket with a new one.

INSTALLATION

Installation is in the reverse order of removal. 

INSTALLATION NOTE:  After installation, fill ATF and check the fluid level. 

Clutch, M/T > < Valve Body, A/T|Overhaul|Page 3828