Corolla Sedan 4-Door L4-1587cc 1.6L DOHC MFI (1997)
Clutch Slave Cylinder: Service and Repair
Overhaul
DISASSEMBLY
1. Remove bleeder plug.
Torque: 8.3 Nm (74 inch lbs.).
2. Pull out boot with push rod.
3. Remove piston. Using compressed air, remove the piston with the spring from the cylinder.
ASSEMBLY
1. Coat piston with lithium soap base glycol grease, as shown.
2. Install piston with spring into cylinder.
3. Install boot with push rod to cylinder.