Corolla Sedan 4-Door L4-1587cc 1.6L DOHC MFI (1997)
b. Remove the boot and 2 clamps from the outboard joint.
-
SAGINAW type:
a. Using a side cutter, cut the 2 boot clamps.
b. Remove the boot from the outboard joint.
CAUTION: Do not disassemble the outboard joint.
8. Remove dust cover from the inboard joint tulip, using SST 09950 - 00020 and a press.
9. Remove No.2 dust deflector.
a. Mount the outboard joint shaft in a soft jaw vise.
b. Using a screwdriver and hammer, remove the No.2 dust deflector.
CAUTION: Be careful not to damage the ABS speed sensor rotor.
Assembly
1. Install new no.2 dust deflector, using SST 09309 - 36010, 09316-20011 and a press.
CAUTION: Be careful not to damage the ABS speed sensor rotor.
2. Install new dust cover, using a press, install the inboard joint tulip into a new dust cover.
