Corolla Sedan 4-Door L4-1587cc 1.6L DOHC MFI (1997)
Flex Plate: Testing and Inspection
DRIVE PLATE INSPECTION
1. Measure drive plate runout and inspect ring gear. Set up a dial indicator, measure the drive plate runout.
Maximum runout: 0.20 mm (0.0079 inch).
If the runout is not within the specification, replace the drive plate. If installing a new drive plate, note the orientation of spacers and tighten the
bolts.
Torque: 64 Nm (47 ft. lbs.).